3D Printer

Posts Tagged ‘System’

The Emergence Of Holographic Video
Researchers at the University of Arizona (UA), Tucson, have developed a holographic system that can transmit a series of 3D images in near-real-time, a precursor to holographic videoconferencing. The system incorporates a novel, photorefractive polymer–one that can rapidly refresh holographic images and is scalable for production–coupled to a unique system for recording and transmitting 3D …

Read more on Medical News Today

Car Produced With a 3D Printer
Lanxon writes “A prototype for an electric vehicle — code named Urbee — is the first to have its entire body built with a 3D printer, reports Wired. Stratasys and Winnipeg engineering group Kor Ecologic have partnered to create the electric/liquid fuel hybrid, which can deliver more than 200 miles per gallon on the motorway and 100 miles per gallon in the city.” Read more of this story at …

Read more on Slashdot

Apple updates HP printer drivers in Snow Leopard
Apple today pushed a large (387.47MB) update via Software Update to owners of various HP printers, scanners and all-in-ones under Mac OS X 10.6.1 or higher (Snow Leopard). Details on what models specifically have been added or updated in the new v2.5.2 update were not available, but a current list of all the HP models supported under Snow Leopard is now available at Apple’s web site. The company …

Read more on MacNN

Spellbinders Paper Arts Announces Partnership with Eight Stamp Design Companies
Phoenix – Preferred Stamp Companies to Design Stamp Images That Coordinate With Spellbinders’ Exquisitely Detailed Die Templates Peoria, AZ – July 19, 2010 — Spellbinders™ Paper Arts, LLC, an award-winning inventor, manufacturer and marketer of cutting edge tools for crafters, is pleased to announce its ‘Preferred Stamp Companies’ partners.

Read more on dBusinessNews.com

The 15th Web3D 2010 Conference to Explore High- Integrity 3D Multimedia Virtual Information Spaces
The ACM International Web3D 2010 Conference with a history of over 15 years is a major annual event that unites researchers, developers, experimenters, and content creators in a dynamic learning environment to address a wide range of topics related to 3D multimedia on the Web. With over 25 paper presentations, tutorials, workshops and panel sessions, the conference also focuses on recent trends …

Read more on PRWeb via Yahoo! News

Wafer Bonding System suits high-volume HB-LED manufacturing.
With design for multi-substrate bonding, EVG560HBL offers throughput rates of 160 bonds/hr. Force capability, in-situ low-force wedge compensation, and compliant layer technologies ensure bond uniformity across entire wafer. Integrated pre-processing modules are included for low-temperature metal wafer bonding, and bond chamber design enables substrate change-out in under 30 min. Along with …

Read more on ThomasNet

Fingerprint scanner

The latest technology of investigation is, a computer mouse can be used as fingerprint scanner. Fingerprint-based PC solution has been designed specially to provide high level biometric security for desktops as well as complex network environments. Aryah.net provides a foolproof solution using fingerprint authentication. It is very effective in resolving proxy entry problems inherent in other traditional systems.

The types of fingerprint scanner usb mouse’s are as follows

The fingerprint scanner process is used in usb mouse, which is very helpful to catch out the victim. a sensitive thin plate is used in the upper side of the mouse.

BioMini is a high performance USB fingerprint scanner for fingerprint authentication in desktop or network security. it is the best biometric system and it provides high level  security.

UPEK Eikon Touch 300 Fingerprint Scanner is cost e?ffective single finger capture device. This fingerprint scanner is ideal for multi-user applications where no user training is required.  SteelCoat protective layer improves durability.

The new 3D Optical Computer Wireless Fingerprint scanner Mouse still looks too cumbersome to use comfortably for those of us who type about as much as we breathe on any given day.

Sony’s FIU-600 fingerprint scanner. Biometric system is made up of a pattern of ridges and furrows as well as characteristics that occur at Minutiae points.

Award-Winning Aryah.net Software Solutions Pvt Ltd. is committed to provide fingerprint scanner, biometric system, security products, access control system, attendance system, Geographical Penetration and ability to address various Customer Segments by providing “Cost Effective IT Security Solutions to Business Enterprises focused on Quality, Service and Customer Satisfaction” and also Continually improve the effectiveness of Quality Management System through Involvement of all Personnel.

Barco introduces 3D reconstruction system for use with cone-beam CT scanners

In response to the fast growing need for instant imaging of raw cone-beam CT data, medical imaging specialist Barco has introduced a powerful 3D reconstruction system.

Utilizing the latest graphics processing unit (GPU) technology, the new system significantly improves the speed and accuracy of CT image acquisition.

The brand-new 3D reconstruction product, named TDRS-7101, utilizes the computing power of Barco ‘s MXRT-7100 graphics board to deliver real-time reconstructions of raw CT images with uncompromised image quality. In doing so, it markedly improves the performance of cone-beam CT acquisition systems used for dental imaging, radiation oncology and intra-operative imaging.

Barco ‘s TDRS-7101 solution has the additional advantage of offering not only CT reconstruction, but also 3D rendering based on the company’s 3D advanced visualization technology. To further reduce overall system cost, the versatile system can also replace the standard display controller used to display the images. As such, the TDRS-7101 offers a cost-effective ‘three-in-one’ solution for today’s medical imaging applications.

The TDRS-7101 3D reconstruction package includes a high-performance graphics board, a custom Barco driver and the complete SDK (software development kit). This comprehensive bundle allows OEM partners to rapidly and easily integrate 3D reconstruction into their own applications. To ensure seamless support, Barco manages the TDRS-7101 reconstruction system throughout its entire lifecycle.

Barco ‘s new 3D reconstruction system will be demonstrated at ASTRO 2007, booth #1123.

The TDRS-7101 3D reconstruction package includes a high-performance graphics board, a custom Barco driver and the complete SDK (software development kit). This comprehensive bundle allows OEM partners to rapidly and easily integrate 3D reconstruction into their own applications. To ensure seamless support, Barco manages the TDRS-7101 reconstruction system throughout its entire lifecycle.

Barco ‘s new 3D reconstruction system will be demonstrated at ASTRO 2007, booth #1123.

out of the following:

MaxBlast 3 (Maxtor) 3.6
DiscWizard 2003 (Seagate) 10.45.06
Disk Manager (Seagate) 9.56a
Disk Manager (Samsung) 10
Hard Disk Diagnosis
Drive Fitness Test (IBM/Hitachi) 3.73
PowerMax (Maxtor/Quantum) 4.09
DLG Diagnostic (Western Digital) 4.15
DLG Diagnostic (Western Digital) 5.04c
Data Lifeguard (Western Digital) 11.0
SeaTools Desktop (Seagate) 1.06.02
SeaTools Desktop (Seagate) 3.00.06en
Diagnostic Tool (Fujitsu) 6.20
SHDIAG (Samsung) 1.25
HUTIL (Samsung) 1.19
Hard Disk Device Management
Feature Tool (IBM/Hitachi) 1.94
AMSET (Maxtor) 4.00
MAXLLF (Maxtor) 1.1
UATA100 (Seagate) 3.06
Ultra ATA Manager (Western Digital) June, 2003
SMARTUDM 2.00
ATA Password Tool 1.1
Hard Disk Wiping
AutoClave 0.3
Active@ KillDisk Free Edition 3.0
Darik’s Boot and Nuke 1.0.3
PC INSPECTOR e-maxx 0.95 Build 775
Hard Disk Cloning
HDClone (Free Edition) 2.0
g4u 1.17
PC INSPECTOR clone maxx 0.95 Build 769
Partition Tools
Ranish Partition Manager 2.44
XFDISK (Extended FDISK) 0.9.3beta
SPFDISK (Special FDISK) 2000-03q
TestDisk 5.3
Partition Resizer 1.3.4
Partition Saving 2.90
Free FDISK 1.2.1
MBRtool 2.2.100
MBRWork 1.07b
FIPS 2.0
GAG 4.3
Active@ Partition Recovery 2.1.1
Disk Editor 3.0
Boot Managers
Smart BootManager 3.7R1
Gujin 0.8
File Managers
DOS Navigator 3.7.0
File Maven 3.5a
NTFS Tools
Offline NT Password & Registry Editor
Note: The SCSI drivers are available on the CD in scsi/. Selecting “[a] autoprobe for the driver” on startup should do the trick. 040116
Active NTFS Reader for DOS 1.0.1
EditBINI 1.01.1
CPU/Memory Diagnosis
CPU Burn-in 1.00
Memtest86 3.1a
Memtest86+ 1.20
Windows Memory Diagnostic n/a
DocMem RAM Diagnostic 1.45a
DocMem RAM Diagnostic 2.1b
Intel Processor Frequency ID Utility 7.1.20040716
Lucifer 1.0
DOS Boot Disks
Bart’s Network Boot Disk n/a
Bart’s CDROM Boot Disk n/a
FreeDOS Boot Disk n/a
Linux Boot Disks
Tom’s Boot Disk 2.0.103
Recovery Is Possible (RIP) 3.0
BasicLinux 2.1
Trinux 0.89
System Information
AIDA16 2.14
NSSI 0.58.1
PC-Config 9.33
ASTRA 4.21
PCISniffer 1.2
Benchmarks
System Speed Test 32 4.78
Antivirus Tools
F-Prot Antivirus for DOS (Personal use only)
Virus definition: 27 July 2004 3.15
McAfee Antivirus Scanner
Virus definition: 27 July 2004 4.32.0
Network Tools
Freesco 0.3.2
Arachne WWW Browser 1.75
QNX Demo Browser (network and modem version) 4.00
Miscellaneous
Disk Image Writer
Original work by Adrian Stanciu. Writes disk images on UBCD to physical floppy disks. 0.3.2
DOS Utilities
Note: These utilities are located on the CD in the DOSAPPS subdirectory. Use one of the DOS boot disks with CDROM access to run them directly from the CD.
3DBENCH – Tool for testing older VGA cards on their 3D features
BIOS – BIOS password finder, BIOS information display etc.
CDBENCH – CDROM drive benchmark tool
CDCAP – ATA/SCSI drives features display tool
CDIDENTI – CD media information tool
CTCACHE – Displays some cache/DRAM configs of mainboard chipsets
CTRAM – RAM check utility
LFNTOOLS (V1.79) – Tools for working with long filenames
DISKMAN4 (V4.0) – Performs a variety of low level hard disk related tasks
BOOTPART (V2.5) – Add additional partitions to the Windows NT multi boot menu
PARALLEL (V1.45) – Parallel port detection and test utilities
UNIFLASH (V1.37) – Utility, that can flash BIOS on many boards
WIPECMOS (V1.2) – Clears all CMOS settings to recover from lost passwords
CPUBENCH – CPU benchmark program
PCI (V0.49B) – PCI system information and exploration tool
CMOSPWD (V4.3) – CMOS password recovery tool

Vi3Dim have developed a new 3D capture system that could revolutionize the way in which 3D models of real-world objects are created.We have created a program able to build 3D models of textured objects , using only a standard computer and webcam. This allows 3D modeling to become accessible to everybody.

3D Design Courses, School of Art, Design and Architecture, visit www.huddersfield3d.co.uk. This video shows the hardware testing and useage for 3D character animation creation used for visualising design into 3D virtual environment Motion capture, motion tracking, or mocap system used here at the Art, Design and Architecture at the University is moven full body system. The process of recording movement and translating the movement onto a digital model is used in game, military, entertainment, sports, 3D animations and medical applications. In filming the human actors use the system to animate digital character models in 3D animation. When it includes face, fingers and captures subtle expressions, it is often referred to as performance capture. In motion capture records only the movements of the actor, not his/her visual appearance. Camera movements can also be motion captured so that a virtual camera in the scene will pan, tilt, or dolly around the stage driven by a camera operator, while the actor is performing and the motion capture system can capture the camera and props as well as the actor’s performance.

Eco-Friendly 3D Printing Cleaning System is Latest Green Initiative from Stratasys
MINNEAPOLIS—-Dimension 3D Printing, a brand of Stratasys Inc., today introduced WaveWash,™ an eco-friendly cleaning system that dissolves the support material from models made with Dimension 3D Printers.

Read more on Business Wire via Yahoo! Finance

SpaceClaim Integrates KeyShot(TM) Photographic Rendering Into Its Innovative 3D Direct Modeling Solutions
Partnership With Luxion ApS Enables Engineers to Turn 3D Models Into Realistic Images Quickly and Easily

Read more on Marketwire

Related Searches
Crest® 3D White Products To Get Whiter Teeth & A Brighter Smile! www.Walmart.com/3DWhite Request Information from Fashion Design Schools Near You! www.collegebound.net

Read more on Madrid 2012

import java.util.Scanner;
import java.text.DecimalFormat;

public class LoanPayment
{

//main method beings with exevution of Java application
public static void main ( String args[])
{

//create scanner to obtain input from command window
Scanner input = new Scanner(System.in);

DecimalFormat decimalPlaces=new DecimalFormat(“0.00″); //Create Format

System.out.print(“Welcome to the Loan Payment Calculator by Jeffery Smith”);
System.out.print(“\nFor Exercise 1 in CMIS 212″);

//declare variables
double I;
double LB;
double CC;
double DP;
double Y;
double PpY;
double MonthlyPayment;

//declare variable for exercise 2
double NB;
double PA;
double IA;
double IB;

//declare variables for totals
double PT = 0;
double IT = 0;
double BT = 0;

//instruction line
System.out.println(“\nFor each of the prompts below, enter a single value and press Enter:”);

//prompt
System.out.print(“Yearly Interest Rate:”);
I = input.nextDouble();//read first number from user

System.out.print(“Loan Amount:$”);
LB = input.nextDouble();//read first number from user

System.out.print(“Closing Costs:$”);
CC = input.nextDouble();//read first number from user

System.out.print(“Down Payment:$”);
DP = input.nextDouble();//read first number from user

System.out.print(“Time(in years) for loan:”);
Y = input.nextDouble();//read first number from user

System.out.print(“Number of payments per year:”);
PpY = input.nextDouble();//read first number from user

//formula to the the MonthlyPayment
MonthlyPayment = (I * (LB + CC – DP)) / (PpY * ( 1 – Math.pow(1 + I/PpY, -Y * PpY) ));
MonthlyPayment = Math.ceil(MonthlyPayment *100)/100;//round to the nearest cent
System.out.printf(“The total is $%.2f\n”, MonthlyPayment );

System.out.println(“\nYear\tPayment\tPrinciple\tInterest\tBalance”);
System.out.println(“————————————————————”);

IB = LB + CC – DP;
IA = IB * (I / PpY);
PA = MonthlyPayment * Math.pow(1+IA,PpY);
NB = IB – PA;

for (int year = 1; year <= Y; year++)
{

for (int payment = 1; payment <= PpY; payment++)
{

NB = IB* Math.pow( 1.0 + I, -payment );

PA = MonthlyPayment * Math.pow(1+ I, -payment);

IA = PA * Math.pow(1+ I, -payment);

for (int number = 1; number <= PpY*Y; number += 1)
{
PT = PpY * PA;
}

for (int number = 1; number <= PpY; number += 1)
{
IT = PpY * IA;
}

System.out.printf("%s \t%3d% 11.2f\t %12.2f\t %15.2f\n",year, payment, PA, IA, NB);

}
System.out.println("::::::::::::::::::::::::::::::::::::::::::::::::::::::::");
System.out.printf("Year %s Totals: Principle: %.2f Interest: %.2f Balance: %.2f\n", year,PT,IT, NB);
System.out.println("::::::::::::::::::::::::::::::::::::::::::::::::::::::::");

}// end for loop
}//end method main
}//end class LoanPayment

3D laser scanner technology gives Glynn County police 360 degree view of crime scenes
BRUNSWICK – Glynn County jurors can soon climb stairs at murder scenes, examine the evidence from several angles and trace the steps of a suspect, all in the relaxed comfort of the chairs in the jury box.

Read more on The Florida Times-Union

Creaform Breathes Life into a Symbol of the Olympic Games
The Inukshuk that Inspired the Creator of the Vancouver 2010 Logo Enters the Virtual World Levis, February 25th, 2010 – Creaform has produced a short animated film featuring a full-size 3D scan model of the Inukshuk that served as inspiration to the creator of the logo for the 2010 Olympic Winter Games in Vancouver. Olympic fever has long been burning from coast to coast to coast, and Creaform …

Read more on ThomasNet

SensAble Technologies announces second, fully integrated scanner option for Dental Lab System
SensAble Technologies, Inc®, a leading provider of 3D touch-enabled modeling systems, dental CAD/CAM solutions and haptic devices, has announced that it will be offering a second, fully integrated scanner option for the SensAble Dental Lab System, as well as SensAble’s new OpenScan™ software interface. The new scanner supports the scanning of both models and impressions, providing a high degree …

Read more on News-Medical-Net